Product Overview:
       PP slotted meltblown filter element is made of pure polypropylene by hot melt spray one-step molding, suitable for deep coarse filtration of high cleanliness liquid, usually used as a security filter for precision membrane filtration.

Product Features:
The filtration accuracy is high, the pressure difference is small, the flow capacity is large, the dirt absorption is large, and the service life is long; the filter aperture is small and large, which has a good deep filtration effect; the filter element is made of pure polypropylene, which is acid-resistant and alkali-resistant, and has no secondary pollution.

Main technical performance:
Nominal filtration accuracy: 1μm, 5μm, 10μm, 20μm, 30μm, 50μm, 75μm, 100μm.
Filter outer diameter: 55mm, 63mm, 65mm.Inner diameter of the filter element: 28mm, 30mm. The polypropylene meltblown filter element can be used with non-organic solvents such as water, acid and alkali, chemical solution, etc., and the operating temperature is ≤ 60 ℃.

       Filter length: Inch 10 ", 20", 30 ", 40"; Metric 250mm, 500mm, 750mm, 1000mm; Non-standard dimensions can be made according to customer requirements.
Application areas: electroplating solution, magnetic plasma filtration, all kinds of precise filtration pre-filtration, fermentation broth filtration, RO security filtration.
Model: The outer diameter is 70mm, the length is 5, 10, 20, 30, 40 inches, and the filter element interface has three types: flat pressure, insertion, and snap-in.